Det-Tronics X5200 UVIR Flame Detector - Manual (Page 19)

17 95-8546 13.1
pERIODIC CHECkOuT pROCEDuRE
In compliance with SIL 2, a checkout of the system
using the Mag oi or Man oi feature should performed
regularly to ensure that the system is operating properly.
Refer to Table 1 in the X5200 Safety manual (95-8672) for
frequency of proof tests. To test the system, perform the
“Fire Alarm Test” as described in the “Startup Procedure”
section of this manual.
CLOCk bATTERy
The real time clock has a backup battery that will
operate the clock with no external power. Return the
device to the factory for battery replacement if needed.
NOTE
If the backup battery is depleted, there is no effect
on the operation of the flame detector, but the time
stamping of the data log may be affected.
fEaTuRES
• Responds to a fire in the presence of modulated
blackbody radiation (i.e. heaters, ovens, turbines)
without false alarm.
• High speed capability.
• Built-in data logging / event monitoring, up to 1500
events (up to 1000 general, 500 alarms).
• Microprocessor controlled heated optics for
increased resistance to moisture and ice.
• Automatic, manual or magnetic oi testing.
• Easily replaceable oi plate.
• Fire, fault and auxiliary relays standard.
• 0 to 20 mA isolated output (optional).
• Eagle Quantum Premier LON/SLC output (optional).
• HART communication (optional)
• FDT/DTM capable
• A tri-color LED on the detector faceplate indicates
normal condition and notifies personnel of fire alarm
or fault conditions.
• Operates under adverse weather conditions.
• Mounting arm allows easy sighting.
• Integral wiring compartment for ease of installation.
• Explosion-proof/flame-proof detector housing. Meets
FM, CSA, ATEX and CE certification requirements.
• Class A wiring per NFPA-72.
• Meets NFPA-33 response requirement for under
0.5 second (available when model selected).
• 3 year warranty.
• Advanced signal processing (ARC/TDSA).
• RFI and EMC Directive compliant.
Associated Manuals
List of X5200 related manuals:
TITLE FORM NuMbER
Pulse 95-8547
EQP 95-8533
SIL 2 (Safety) 95-8672
HART Addendum 95-8636
Q9033 Mounting Arm
and Collar Attachment
95-8686
Inspector Monitor Software for
X-Series Flame Detectors
95-8581