Det-Tronics X3301 Multispectrum IR Flame Detector SAFETY MANUAL - Manual

SAFETY MANUAL
Protect•IR ®
Multispectrum IR Flame Detector
SIL 2 Certified Models X3301/X3302
5.1 © Detector Electronics Corporation 2012 Rev: 8/12 95-8582
SAFETY-CERTIFIED MODEL X3301/X3302
MULTISPECTRUM INFRARED DETECTOR
This manual addresses the specific requirements and
recommendations applicable to the proper installation,
operation, and maintenance of all Safety‑Certified
(SIL‑Certified) X3301/X3302 Multispectrum Infrared
Flame Detectors. The safety function of the X3301/
X3302 is to detect a variety of fires and to provide
present alarm status to its relay, analog or LON outputs.
For complete information regarding performance,
installation, operation, maintenance, and specifications,
refer to the appropriate instruction manual:
X3301 95‑8527
X3302 95‑8576
QUALITY POLICY STATEMENT
All quality assurance control measures necessary for
safety management as specified in IEC 61508 Part 1 have
been implemented. The quality management system of
Det‑Tronics is based on the requirements of EN ISO 9001
and ANSI/ASQC Q9001 through the application of the
United Technologies Company Achieving Competitive
Excellence (ACE) program. In addition, the Quality
Management System complies with the European ATEX
Directive requirements per EN 13980, the International
Electrotechnical Commission requirements per
OD005/V2, and the supervised testing requirements
per ISO 17025.