Det-Tronics X3301 Multispectrum IR Flame Detector with Pulse Output - Manual (Page 37)

35 95-8528 11.1
aPPENDIX E
EN54 appROvaLS
agENCy
Conventional Output LON Output
Certificate/approval
Number
Basis of approval
Certificate/approval
Number
Basis of approval
VdS –
Constructive Product Directive
0786 – CPD – 20453 EN 54-10 + A1 — —
VdS
G 202136
VdS 2344
VdS 2504
EN 54-10 + A1
G 212019
VdS 2344
VdS 2504
EN 54-10 + A1
EN 54-17
S 212002
VdS 2344
EN 54-13
S 212002
VdS 2344
EN 54-13
BRE –
Constructive Product Directive
— — 0832 – CPD – 1381
EN 54-10 + A1
EN 54-17
LPCB 973e/03 EN 54-10 + A1 973a/03
EN 54-10 + A1
EN 54-17
INSTRUCTIONS FOR ThE appLICaTION OF ThE appROvaL COMpONENT/SySTEM
The installation shall take into account, that the orientation arrow on the flame detector is directed upwards, as the view
angle in this direction is <90°.
The IR-flame detector configured to High or Very High sensitivity corresponds to class 1.
The IR-flame detector configured to T-Low or Low sensitivity corresponds to class 2.
The following accessories are EN54-10 and EN54-17 approved for use with the X3301 Flame Detector:
part Number Description
102740-002 Magnet
007739-001 Magnet and Extension Pole
007290-001 Q9033B Stainless Steel Mounting Arm Assembly is for aluminum and stainless steel detectors
007290-002 Q9033A Aluminum Mounting Arm Assembly is for aluminum detectors only
011385-001 Q9033 Collar Attachment