Elkhart Brass Scorpion 7400 EXM Monitor User Manual
Page 20
Advertising
20
Installation Step 4: Check Installation
After mounting, wiring, configuring, and calibrating the EXM system, check the installation of the entire
EXM system.
Ensure that all components have been mounted securely and have had the correct fuses installed
within their wiring leads.
Ensure that all components have been configured (if required) and that all components are
functioning.
Ensure that the EXM system has been calibrated correctly for its specific installation.
Ensure that all components are performing normally.
o
For a list of operating functions that the EXM system should be capable of performing, go
to the operating instructions section.
Advertising