Connector j2 – ElmoMC Gold Line Digital Servo Drives-Gold Guitar User Manual
Page 25
Gold Guitar Installation Guide
Installation
MAN-G-GUTIG (Ver. 1.005)
25
4.3.2.4.
Connector J2
Feedback A/B/C, Digital Halls – see
Section
Analog Inputs – see Section
RS-232, EtherCAT, USB – see Section
Connector Type: 1.27 mm pitch 0.41 mm
sq
Note regarding the EtherCAT and CAN communication options:
The J2 Connector exports all supported communication links. However, note that CAN and
EtherCAT are not available in the same version of the Gold Guitar and are thus not operational
simultaneously. See the part number diagram in Section
4.2 above for the different Gold Guitar
configurations.
Pin (J2)
Signal
Function
1
PortA_ENC_A+ /ABS_CLK+
Port A- channel A/ Absolute encoder clock+
2
PortC_ENCO_A-
Port C- channel A complement output
3
PortA_ENC_A-/ABS_CLK-
Port A- channel A complement / Absolute
encoder clock-
4
PortC_ENCO_A+
Port C- channel A output
5
PortA_ENC_B+/ABS_DATA+
Port A - channel B/ Absolute encoder Data+
6
PortC_ENCO_B-
Port C - channel B complement output
7
PortA_ENC_B-/ABS_DATA-
Port A - channel B complement / Absolute
encoder Data-
8
PortCENCO_B+
Port C - channel B output
9
PortA_ENC_INDEX+
Port A – index