Analog input – ElmoMC Gold Line Digital Servo Drives-Gold Guitar User Manual
Page 52
Advertising
Gold Guitar Installation Guide
Installation
MAN-G-GUTIG (Ver. 1.005)
52
Pin (J2) Signal
Function
2
PortC_ENCO_A-
Buffered Channel A- output/Pulse-/PWM-
4
PortC_ENCO_A+
Buffered Channel A+ output / Pulse+/PWM+
6
PortC_ENCO_B-
Buffered Channel B- output / Dir-
8
PortC_ENCO_B+
Buffered Channel B+ output / Dir+
10
PortC_ENCO_INDEX-
Buffered Channel INDEX- output
12
PortC_ENCO_INDEX+
Buffered Channel INDEX+ output
Table 14: Port C Pin Assignment
Figure 24: Emulated Encoder Differential Output – Recommended Connection Diagram
4.9.4.
Analog Input
An analog user input can be configured by software to be used as either tachometer velocity
sensor input or potentiometer position feedback. For connection diagrams refer to
Section 4.10.3.
Advertising