Chapter 6: wiring, Chapter 6, Wiring – ElmoMC Gold Line Digital Servo Drives-Gold DC Trombone User Manual
Page 22: N chapter 6: wiring
Gold DC Trombone Installation Guide
MAN-G-DCTROIG-EC (Ver. 1.900)
||Connection Diagrams
22
Chapter 6:
Wiring
Once the product is mounted, you are ready to wire the device. Proper wiring, grounding and
shielding are essential for ensuring safe, immune and optimal servo performance of the drive.
The following table legend describes the wiring symbols detailed in all installation guides.
Wiring Symbol
Description
Earth connection (PE)
Protective Earth Connection
Common at the Controller
Shielded cable with drain wire.
The drain wire is a non-insulated wire
that is in direct contact with the braid
(shielding).
Shielded cable with drain wire
significantly simplifies the wiring and
earthing.
Shielded cable braid only, without drain
wire.
Twisted-pair wires