ElmoMC Gold Line Digital Servo Drives-Gold DC Trombone - Manual (Page 66)

Gold DC Trombone Installation Guide
MAN-G-DCTROIG-EC (Ver. 1.900)
|| www.elmomc.com
66
Table of Contents
Chapter 7: Pow ering Up
After the Gold DC Trombone is connected to its device, it is ready to be powered up.
Caution:
Before applying power, ensure that the DC supply is within the specified range
and that the proper plus-minus connections are in order.
7.1 Initializing the System
After the Gold DC Trombone has been connected and mounted, the system must be set up and
initialized. This is accomplished using the EASII, Elmo’s Windows-based software application. Install
the application and then perform setup and initialization according to the directions in the EASII
User Manual.