Chapter 8: 24 vdc auxiliary supply, Chapter 8, 24 vdc auxiliary supply – ElmoMC Gold Line Digital Servo Drives-Gold Tuba Cable Kit User Manual
Page 18
Advertising
![background image](/manuals/558361/18/background.png)
Gold Tuba Cable Kit (EtherCAT and CAN)
MAN-G-TUB-CBLKIT (Ver. 1.000)
18
Chapter 8:
24 VDC Auxiliary Supply
The 24 VDC auxiliary supply is a single 24-AWG double-shielded twisted-pair cable. It is
connected to the Gold Tuba VL connector on the servo drive side.
The cable is open on the end side so that it can be connected to the power supply.
The general pinout of the 24 VDC auxiliary supply is as follows:
Pin
No.
Signal
Color
Twisted &
Shielded Wire
VL+
+24VDC
Red
Pair
VL-
24VDC_RET
Black
Pin Positions
2-Pin Pluggable 3.81 mm Phoenix Connector
2-Pin Phoenix Plug-in
Connector
Note:
The specific functionality of each pin is described fully in the Gold Tuba Installation
Guide.
Figure 4: 24 VDC Auxiliary Supply Cable
Advertising