ElmoMC ExtrIQ Digital Servo Drives-Hornet - Manual (Page 27)

Hornet and Bee Installation Guide Installation
MAN-HRBEIG (Ver. 1.304)
www.elmomc.com
27
3.7.2. Connecting Main Power
Connect the VP+, PR and PE pins on the Hornet/Bee in the manner described in Section 3.5
(Integrating the Hornet or Bee on a PCB).
Figure 7: Main Power Supply Connection Diagram
3.8. Auxiliary Supply (for drive logic)
Notes for 11 to 95 VDC auxiliary supply connections:
Connect the VL and PR pins on the Hornet/Bee in the manner described in Section 3.5
(Integrating the Hornet or Bee on a PCB).
Pin Function Pin Positions
VL Auxiliary Supply Input
PR Supply Input Return
Caution:
Power from the Hornet/Bee to the
motor must come from the Main
Supply and NOT from the Auxiliary
Supply.
Table 3: Auxiliary Supply Pins