ElmoMC Power Supplies-TAM-100 - Manual (Page 17)

Tambourine 100 Power Supply
MAN-TAM-100IG (Ver. 1.101)
|| www.elmomc.com
17
Table of Contents
1.14. Mounting and Wiring the Tambourine 100
For optimum heat dissipation, the Tambourine 100 should be installed with the heat sink
attached to the machine's chassis. It is recommended to mount the Tambourine 100 in the
vertical position as shown in Figure 3.
1.14.1. Mounting
Figure 3: Mounting the Tambourine 100
The Tambourine 100 is designed for a standard wall mounting (Figure 3), along the back (can
also be mounted horizontally on a metal surface).
Use M4 x 8 round head screws, one through each of the specific holes drilled.
Tighten the screws to just tight between 2 – 4 Nm.