Digital outputs – ElmoMC Power Supplies-TAM-100 User Manual
Page 27
Tambourine 100 Power Supply
MAN-TAM-100IG (Ver. 1.101)
27
1.16. Digital Outputs
OUT1 : Temperature
forewarn alert
Whenever the FAN is unable to restrict the Heat sink temperature
from rising, and the Heat sink temperature is exceeding 75 C deg.
this output becomes conductive.
This output can be used to inform and warn the user about
approaching thermal shutdown of the machine, so he can take
prevention steps, such as start cooling the control chamber, etc.
OUT2 : AC Failure
This output becomes conductive, and can be used to inform the
user whenever the Mains AC source is being shut down
temporarily or permanently from any reason, or when one of the
mains phase is missing temporarily or permanently, or when the
three phases are significantly unbalanced.