Directives and standards, Ce mark conformance, Warranty information – ElmoMC Power Supplies-TAM-100 User Manual
Page 6
Tambourine 100 Power Supply
MAN-TAM-100IG (Ver. 1.101)
6
1.3. Directives and Standards
The Tambourine 100 power supply conforms to the following industry safety standards:
Safety Standard
Item
In compliance with UL 508C
Power Conversion Equipment
In compliance with UL 840
Insulation Coordination, Including Clearance and
Creepage Distances of Electrical Equipment
In compliance with UL 60950-1
(formerly UL 1950)
Safety of Information Technology Equipment,
Including Electrical Business Equipment
In compliance with EN 60204-1
Low Voltage Directive, 73/23/EEC
The Tambourine 100 power supply has been developed, produced, tested and documented in
accordance with the relevant standards. Elmo Motion Control is not responsible for any
deviation from the configuration and installation described in this documentation.
Furthermore, Elmo is not responsible for the performance of new measurements or ensuring
that regulatory requirements are met.
1.4. CE Mark Conformance
The Tambourine 100 power supply is intended for incorporation in a machine or end product.
The actual end product must comply with all safety aspects of the relevant requirements of the
European Safety of Machinery Directive 98/37/EC as amended, and with those of the most
recent versions of standards EN 60204-1 and EN 292-2 at the least.
According to Annex III of Article 13 of Council Directive 93/68/EEC, amending Council Directive
73/23/EEC concerning electrical equipment designed for use within certain voltage limits, the
Tambourine 100 power supply meets the provisions outlined in Council Directive 73/23/EEC.
The party responsible for ensuring that the equipment meets the limits required by EMC
regulations is the manufacturer of the end product.
1.5. Warranty Information
The products covered in this manual are warranted to be free of defects in material and
workmanship and conform to the specifications stated either within this document or in the
product catalog description. All Elmo drives are warranted for a period of 12 months from the
time of installation, or 18 months from time of shipment, whichever comes first. No other
warranties, expressed or implied — and including a warranty of merchantability and fitness for
a particular purpose — extend beyond this warranty.