ETC Desire Series XTI v1.6.0 - Manual (Page 13)

1
Installation and DMX Profiles 8
Specifications
Physical
• Rugged die-cast aluminum construction • Stainless steel mounting yoke
• Advanced thermal management systems for long LED
life
• Available in black (standard), white (optional), silver, or
custom colors (contact factory)
• Easy-to-remove trim ring for accessories • Rated IP66 for exterior use
• Ambient operating temperature
-20 to 40 °C (-4 to 104 °F)
• No-noise, fan-free convection cooling for acoustically
sensitive installations
• Continuous operation at 40 °C (104 °F) • See Fixture Weight, page 9
Electrical
• 100V to 240V 50/60 Hz universal power input • Up to 32 fixtures may be linked on one data chain
• Requires power from non-dim source •
LEDs
• 40 or 60 Luxeon® Rebel™ LED emitters (Vivid, Lustr+,
Fire, Ice, and Studio HD)
• 40 or 60 Luxeon® Rebel™ ES LED emitters (Studio
Daylight and Studio Tungsten)
• 50,000 hr. LED life (50,000 hours to 70% intensity) • See Note About LED Fixtures, page 13
Optical
• Tight primary field angle of 17°
(Vivid, Lustr+, Fire, Ice, and Studio HD)
• Secondary lenses available for multiple beam spread
options including round, oblong, and linear patterns
• Tight primary field angle of 24°
(Studio Daylight and Studio Tungsten)
• Combine linear lenses for desired beam spread
Color
• Specialized capabilities from different LED array
options based on x7 color-mixing expertise:
– Vivid – Optimized for strong, saturated colors at
maximum brightness
– Lustr+ – x7 Color System array with a high-intensity
white LED for an ideal theatrical wash light
Full range color, with an emphasis on lighter colors
and white
– Fire and Ice – Optimized for high-intensity
saturated colors in either the warm, red end of the
spectrum (Fire) or the cool, blue end of the
spectrum (Ice)
– Studio HD — Optimized for variable color
temperature white light
• Interacts seamlessly with conventional sources
• Achieves excellent 3200° or any other Correlated Color
Temperature white light from 2000 to 10,000°K (except
Fire or Ice) (CCT adjustment not available on Studio
Daylight and Studio Tungsten)
• Beautifully illuminates skin tones and other objects
• Deeply saturated colors across an exceptionally wide
gamut
Control
• DMX512-A compliant • Optional strobe channel
• DMX in via 6 foot cord and supplied DMX termination
board
• Master/slave mode
• RDM functionality for address and setting changes and
playing presets
• 15-bit virtual dimming engine for smooth, high-quality
theatrical fades
• Console-free presets and sequences via RDM device • See DMX Profile, page 20
• Multiple profile options for different levels of control