ETC Desire Series XTI v1.6.0 - Manual (Page 6)

1 Desire XTI Series v1.6.0 User Manual
Introduction
Congratulations on your purchase of a Desire Series D40/D60 XTI fixture by ETC.
The Desire XTI Series is designed for permanent installations indoors or outdoors, with an
IP66 rating, rugged die-cast enclosure, and noiseless fan-free operation. Up to 32 Desire
XTI fixtures can be linked together on one data chain and configured over a DMX/RDM
network.
Desire’s x7 Color System™ seven-hue technology produces a light and color quality that
conventional LED systems cannot duplicate. This unique color system produces bright,
broad-spectrum whites and intense colors equally well, rendering pigments, objects, and
skin tones in a natural way.
Fire and Ice fixtures use elements of the x7 Color System for superior performance in deep
saturated colors.
Studio Daylight and Studio Tungsten fixtures use high-output white LEDs for maximum
brightness and efficacy. Studio Tungsten interacts very well with incandescent sources,
while Studio Daylight easily replaces a variety of HMI lamps and natural sunlight.
Quick Setups
You can use any one of the Quick Setups and fine-tune settings for operation via
DMX/RDM protocol.
Vivid, Lustr+, Fire, Ice and Studio HD
Some of the options include:
• Multiple DMX profiles ranging from a simple 3-channel RGB profile to 8-channel native
color and intensity control.
• Multiple dimming curve options.
• Preset colors and sequences for standalone operation.
• White point selection; white light and color behavior based on a specific color
temperature white light such as 3200K or 5600K.
• Loss-of-data behavior options.
• Power regulation modes; three output options that offer a choice between maximum
light output for lower duty cycles and maximum thermal stability and output consistency
for higher duty cycles.