Overview – ETC Desire Series XTI v1.6.0 User Manual
Page 31
2
Operation
26
Overview
Up to 32 Desire XTI fixtures can be daisy-chained on a DMX/RDM network. Each fixture
can have an unique DMX address and each address can be configured separately. Also,
more that one fixture can have the same address, allowing you to configure them
identically.
You can use an RDM configuration tool or an RDM lighting control device to configure the
fixtures. An RDM configuration tool is installed on a PC, which is connected to the
DMX/RDM network via Gadget or a DMX/RDM gateway. After the fixtures are configured,
Gadget or the gateway can be disconnected and a DMX or RDM control device can be
connected to the network for continued operation.
See
.
Figure-2.1 Architecture of a DXTI Series fixture network.
D40XTI
D40XTI
D40XTI
Up to 32 fixtures
Junction
box
Gadget
Console
Junction
box
Junction
box
Or
DMX/RDM
gateway
Computer with Net3 Concert
or UpdaterAtor
DMX/RDM network