Thrupower relay, Thrupower switch (ce only), On dim on dim – ETC SmartPack v2.1.0 User Manual
Page 12
Advertising
8
SmartPack User Manual
Circuit Mode Selection Switches (for SmartPacks with ThruPower)
ThruPower Relay
Each circuit has a dedicated, three-position switch that sets the circuit to Dimmable, Relay,
or Hot Power (constant circuit).
ThruPower Switch (CE only)
Each circuit has a dedicated, two-position switch that sets the circuit to Dimmable or Hot
Power (constant circuit).
Circuits set to
“Hot Power”
Circuit set to
“Relay”
Circuit set to
“Dimmable”
ON
DIM
ON
DIM
ON
DIM
ON
DIM
ON
DIM
ON
DIM
Circuits set to
“Dimmable”
Circuits set to
“Hot Power”
Advertising