ETC SmartPack v2.1.0 - Manual (Page 13)

1
Menus and Configuration 9
Normal Menu Structure
Normal Menu
The normal menu is used to view system status and to set the DMX start address for
SmartPack. The start address range is determined by the size of your SmartPack.
DMX Start Address range:
3 channel: 001-510
6 channel: 001-507
12 channel: 001-501
Set the DMX start address:
Step 1: Scroll to DMX, press .
Step 2: Scroll to DMX Start Address, press .
Step 3: Use + or - to scroll the start address range.
Step 4: Press to set the start address.
Test Menu
The test menu is a tool for testing dimmers and loads. In the absence of a DMX control
source, the test menu may also be used to set dimmer levels for snapshot into a preset.
Enter the Test menu
From any menu, press the test button .
Set dimmer levels in the Test Menu
Step 1: Use < or to select one or [ALL] dimmers.
Step 2: Use + or - to set a level, press . The menu will progress to the next channel.
Step 3: Press , “Exit Test Mode: [Test: all off]” displays.
To exit the Test menu and retain all Test Levels:
Scroll to [Keep test on] and press .
Exit Test menu, clearing all Test Levels and return to the previous menu:
Scroll to [Test: all off] and press .
Press << to return to the main menu and clear all Test Level.
Test Dimmer: [ All ] T
Level: 100%