Pda client installation, Smart phone client installation – EZWatch Evolution User Manual
Page 14
PDA Client Installation
Step 1:
Connect PDA device to the PC.
Step 2:
Insert the installation CD, Run Setup.exe from the CD-ROM directory/PDAClient to install PDA Client.
Note:
If you do not have Microsoft® ActiveSync installed, a message will appear “Cannot find
ActiveSync, install ActiveSync and run installation again”.
Step 3:
Check that the client application is installed completely in PDA device.
Smart Phone Client Installation
Step 1:
Connect Smart Phone device to the PC.
Step 2:
Insert the installation CD, Run Setup.exe from the CD-ROM directory/SPClient to install Smart Phone
Client.
Note:
If you do not have Microsoft® ActiveSync installed, a message will appear “Cannot find
ActiveSync. Please reinstall ActiveSync and then run this installation again.”
Step 3:
Check the client application is installed completely in smart phone device.