EZWatch Evolution - Manual (Page 96)

8.1 Backup Recorded files
Step 1: Add (Remote) Backup Site: Press the “Remote Server ”
button to go to remote backup site management to add
and setup the backup site.
 Enter the IP address or DNS, Port, Username, and Password.
 Click Add to add the server.
 Click OK to exit the Setting panel.
Step 2 : Access (Remote) Backup Site: Click on the icon
and insert the username/password of the remote server to
access the backup Site.
Step 3: Click on New Period to obtain the Select Date/Time Period
panel.
Step 4: Select the data you want to backup by highlighting the time period. Besides the time-table, you may
also set up start time and end time in the Date Time Period section.
Step 5: Click on the camera number icon to add camera(s) or click to add/delete all the channels.
Step 6: Check the box of Enable Preview to get the preview of the video you select.
Step 7: Click OK when the settings are complete and go back to the Backup System panel.
Step 8: If there is any data period not wanted, click Remove Period to remove the data period on the
backup list.
Step 3
Step 1
Step 2
Step 4
Step 5
Step 7
Step 6
Step 8 Step 9