EZWatch Evolution - Manual (Page 52)

4.1.3 Camera Event - Signal Lost
Detect the loss of video signal from camera.
4.1.4 Camera Event - General Motion
- Detect any movement in the defined detection zone.
Alarm Event Option:
 Sensitivity: Click and move the slider control to the right to increase sensitivity so that minimal movement
will trigger the alarm. Move the bar to the left to reduce the sensitivity. Setting up an appropriate
sensitivity value will minimize false alarms. For example, you can lower the sensitivity to avoid the alarm
being triggered by a swinging tree in the breeze.
 Interval: Click and move the slider control to the right to increase interval time so that the alarm will only
be triggered when the movement lasts longer. Move to the left to reduce the interval
Region Definition:
 Define detection zone: To detect General Motion, you have to define a detection zone. Left-click and
drag the mouse to draw a detection zone. You may define more than one zone on the screen by
repeating the same process. User can also click on “All” button to select the entire detection zone.
Start Simulation: Click the Start Simulation button and test the function on the preview screen.
Sensitivity
Interval
Region
Definition
Start Simulation