1 setting, 1 general setting, 2 server setting – EZWatch Evolution User Manual
Page 99: 3 group setting
Server List
General Setting
9.1 Setting
Click General Setting to obtain setting dialog.
9.1.1 General Setting
Audio preview:
Enable audio on active channel:
Select to enable audio streaming on active channel.
Miscellaneous:
Synchronize video frames:
Select to avoid image tearing problems that may occur while CPU
loading is increased.
9.1.2 Server setting
Step 1:
Enter the Server Name.
Step 2:
Enter the Address, Port, User Name, and Password to log in the server.
Step 3:
Enable “Save Password” to login without entering the password again.
Step 4:
Enable “Auto Login” to login automatically when starting Remote Live Viewer.
Step 5:
Click on Test Server to check if the server is available.
Step 6:
Click Add to insert the setting to server list.
Note:
To change the setting, select a server on server list and click “Update” after modify setting.
To remove the server, select a server on server list and then click “Delete”.
9.1.3 Group Setting
Allocate different cameras into each appointed group.