HYDAC HLB 1300 - Manual (Page 28)

User Manual HYDACLab ® 23.10.2008
13
12. Displays
12.1 HDA 5500-0-2-zC-006
The HDA 5500, modification no. 006, is a display unit with 4
programmable switch outputs, which have been specifically
designed for use with HYDACLab
® sensors.
It is possible to display the actual measured values using the
HDA 5500.
Order no.: 909926 HDA5500-0-2-DC-006(CM1k)
Connection to a HDA 5500
X1:
Pin 1: + supply HDA 5500
X1: Pin 2: - supply HDA 5500
X1:
Pin 1: +12V supply HYDACLab (brown)
X1: Pin 2: GND HYDACLab (blue)
X2: Pin 7: analogue output HYDACLab (black)
X2: Pin 11: NC (white)
12.2 HMG 510
Portable 2-channel digital recorder, specially designed for use with HSI and SMART sensors.
It is possible to display the actual measured values on the HMG 510 display.
Order No.: 909889 HMG 510-000
Connecting to a HMG 510
Remove the supply cable from the electrical connection of the HYDACLab
® and screw the
blue Y-adapter for HLB "ZBE 26" onto the sensor. Reconnect the supply cable to connection A
of the Y-adapter and connect connection B using a sensor cable ZBE 30-0z to input A or B of
the HMG 510.
+U
b
B A