HYDAC HLB 1300 - Manual (Page 29)

User Manual HYDACLab ® 23.10.2008
14
12.3 HMG 3000
Portable data recorder with a colour display with full graphics capability to display or record
measured values from the HYDACLab
® . The stored data of the HYDACLab ® can be output,
displayed as a graph and archived. In addition, the HYDACLab ® can be reset using the
HMG 3000.
With the HMG 3000 the actual measured values and the stored measurement curves can be
shown on the HMG 3000 display. The recordings can also be stored and processed on the
HMG 3000 (for a detailed description, see the Operating Manual for the HMG 3000).
Order no.: 909439
HMG 3000-000-D (without accessories)
Connecting to an HMG 3000
Remove the supply cable from the electrical connection of the HYDACLab ® and screw the
blue Y-adapter "ZBE 26" onto the sensor.
Connect one of the inputs A to D of the HMG 3000 to connection B of the blue Y-adapter
"ZBE 26" using a sensor cable "ZBE 30-0z".
Connect the supply cable to connection A of the blue Y-adapter "ZBE 26".
12.4 CMWIN
This is specially developed PC software, which communicates with the HYDACLab
®
via a
communicatons bridge (HMG 510 or HMG 3000 ). Using this software,
measurement curves can be transferred to the PC, stored, displayed and processed or the
actual measured values can be displayed.
CMWIN is supplied with the HMG 510 and HMG 3000.
13. Items supplied
1 HYDACLab
® sensor
1 User manual
+ U
b