JULABO MA Heating Immersion Circulator - Manual (Page 31)

MA
31
9.2. MENU Configuration
Menu level 1

CFG = MENU CONFIGURATION

A RESET can be effected only in the > < mode.
Switch off circulator by pressing the key and call up the menu
CONFIGURATION.
Level 2 Parameter level 
Press the key if a parameter is to be
retained. Correction function for parameters and
values (prior to OK).

or
>3SP< - Switch on and off the 3-setpoint mode

The parameter flashes, set by pressing
+

>YES< - This function can be used by pressing
the key. (refer to page 23)

or
>rt< - Switch on and off remote control

The parameter flashes, set by pressing
+

For remote control refer to 44

Connect RS232 with PC

or
>Aut< - Switch on and off autostart

The parameter flashes, set by pressing
+
AUTOSTART on
AUTOSTART off.
See WARNING page 33

>rSt< (RESET) - Use this to reset all values to
factory setting.

Return to factory settings by pressing

During the message – init - all parameters are
reset to factory settings.