17 configuration - external binary inputs – JUMO 706585 LOGOSCREEN fd Operating Manual User Manual
Page 128
Advertising
17 Configuration - External Binary Inputs
128
Activate
replacement
value
Here, a signal is selected that decides whether the current state will be over-
written with the replacement value ("0").
A useful application of the parameter is the "Timeout monitoring" function,
when the recorder is accessed as Modbus slave (e.g. from a PC/laptop or from
a PLC). Without monitoring, the last received measured value remains even
when the communication with the Modbus master is interrupted.
v Kapitel 2.7 „Binary Signals“
v Siehe “Timeout monitoring” auf Seite 165.
v Siehe “Timeout monitoring” auf Seite 169.
Alarm
configuration
Opens the submenu for the configuration of both alarms.
Advertising