Kinetik Thermometer NCT1 - Manual (Page 13)

Cleaning and Storage:
Please make sure the probe is clean to ensure an accurate reading.
The probe lens is the most delicate part of the thermometer. Use with care when cleaning the
probe lens to avoid damage.
a. Use the alcohol swab or the soft cotton moistened with the alcohol to clean the probe lens.
b. Allow the probe to fully dry for at least 1 minute.
c. Keep the unit dry and away from any liquids and direct sunlight.
d. Storage temperature range: It should be stored at room temperature between -20~+50°C, RH≦85%
e. The Probe should not be submerged into liquids.
Holding the thermometer too long may cause a higher ambient temperature reading of the probe.
This could make the body temperature measurement lower than usual.
Calibration:
This thermometer is calibrated at the time of manufacture. If the thermometer is used according to the
instructions, periodic re-calibration is not required.
* DO NOT ATTEMPT TO MODIFY OR REASSEMBLE THE THERMOMETER.
12