Koolance RM2-4U - Manual (Page 18)

13 User Manual
The components in your Koolance system are connected in series. Each system
contains a heat exchanger and reservoir, but you must choose which coolers you
wish to install in between, for example:
CPU Cooler, Motherboard Chipset Cooler, Video Chipset Cooler
CPU Cooler, 2nd CPU Cooler, Video Cooler, Hard Drive Cooler
Although it is possible to use up to eight (8) coolers in a Koolance system, a
maximum of six (6) is recommended due to a reduction in liquid pressure. Coolers
can also be added or removed later as required.
Typically, a cooler sequence will be:
1. Heat Exchanger
2. CPU Cooler
3. CPU Cooler (for dual-processor systems)
4. Motherboard Chipset Cooler
5. Video Card Chipset Cooler
6. Hard Drive Cooler
7. Reservoir (which connects back to the Heat Exchanger)
However, this order is optional and you may connect your coolers in an alternate
sequence if desired.
Cooler Arrangement