Koolance RM2-4U User Manual
Page 27
22
Connecting Exos Systems
There are 4 main connections to the Slot Interface card which must be made. The
Exos may appear to operate without some of these connections, but the hardware
safety features will be deactivated.
The Exos cooling system requires
approximately 8-10W from any
standard ATX power supply. Since
it is adapted internally, the Exos
does not need a dedicated
external AC power cable.
Connect a 12-volt 4-pin Molex
plug from the power supply to the
Slot Interface Adapter. Without
this important connection, the
Exos system will NOT operate.
Power Supply 4pin 12V
CPU Temperature
Probe
Optional Fan
Connections
Exos External
Connection
Case ATX Power Switch
Motherboard Power Switch
CAUTION
:
The Slot Interface Card is vital to system operation. A 12V
4-pin plug from the power supply must remain connected to the circuit
at all times while the computer is in use.
!