Koolance RM2-4U - Manual (Page 28)

23 User Manual
The black CPU temperature probe is the reading displayed by the front LED panel.
You will position this thermal probe later during the installation of your CPU cooler.
There are 2 power switch connections on the Slot Interface Card. Instead of
connecting the chassis power switch to your motherboard, it will meet with a wire
to the Slot Interface Adapter.
Unplug the chassis ATX power switch lead from
the motherboard. The power switch is typically
labeled “PWRSW”, “PWSW”, or “PWBT”.
The second lead from the Slot Interface
will connect to your motherboard where
the power switch was originally
located.
Connect this lead to the pronged male
connection from the Exos Slot Interface
Adapter.
The new ATX power switch connection
originates from the Slot Interface Adapter.
All other wire leads to your motherboard
should remain connected.