Koolance RM2-4U User Manual
Page 21
Advertising
16
Connecting PC2 & IPC Systems
Clamping
After every cooler is connected, you may tighten the clamps to secure them.
Clamping is done by positioning the reusable clamp just behind the cooler nozzle,
and slowly applying pressure on the adjustment lobe with pliers until it locks.
CAUTION
:
The clamp should be tightened behind the widened portion
of the cooler nozzle. Do not tighten a clamp over or on this nozzle
section, as damage may occur to the cooler.
!
Advertising