Koolance RM2-4U - Manual (Page 26)

21 User Manual
Slot Interface Adapter
The Slot Interface Adapter allows the Exos to connect with any computer through
an available card slot. It is responsible for both input and output tubes, along with
the external power cable connection. This prevents the computer chassis from
requiring any modifications.
Install the Interface Adapter from the inside
of the case, guiding the tension springs out
the back of the slot. The Interface Adapter
may be installed into any available rear card
slot in your computer.
Screw the Interface Adapter in place as you
would a normal device.
From the rear of the case, carefully feed both
ends of the liquid tubing through the tension
springs and into the chassis.
Plug the remaining end of the Exos
external power cable into the Slot Interface
Adapter.