Labnet Z206A High Capacity, Compact Research Centrifuge - Manual (Page 15)

Page 15 of 24 INSTRUCTION MANUAL Z 206 A © HERMLE Labortechnik GmbH
2 OPERATION
2.2.2 Lid release
Once the centrifuge lid is closed the display shows “rpm/rcf“ and “close“ (8). At the same time the pre-
selected rotor type is indicated, ex.. “nr 96” (11). During the run you can call up the rotor type at any time
by pressing the key “lid” (1). By pressing the key “lid“ (1) you can release the lid of centrifuge. As soon
as the electronic lid is completely released, it appears the word “open“ (9). Now you can open the lid of
the centrifuge. (see photo 12)
Photo 12
2.2.3 Lid lock
Attention: Before closing the lid please ensure that the rotor is tight.
As a sign that the centrifuge is ready for operation the display reads ‘rpm/rcf“ the word “close“ (8).
Simultaneously it appears in that display the word “rotor“ (10), as well as the code number of the rotor,
which is in the centrifuge ex. “nr 96“ (11).
11
8
9
1
10