Labnet Z206A High Capacity, Compact Research Centrifuge - Manual (Page 9)

Page 9 of 24 INSTRUCTION MANUAL Z 206 A © HERMLE Labortechnik GmbH
1 PRODUCT DESCRIPTION
1.5.1 Access to the “Operating Data“ Mode
In this mode you can check the following points:
1. Number of starts
2. Operating hours of the centrifuge
3. Software-version
4. Error list
5. Operation of imbalance sensor
6. Operation of keyboard
7. Display test
If the centrifuge is still turned off, press simultaneously the keys “time“ (4) and “lid“ (1) and turn on the
main switch of the centrifuge. Now release both keys again. As a result a display test is executed for
approx. 5 seconds. All possible indications will appear at the same time (see photo 2 ).
Photo 2
ATTENTION:
Please notice that you must enter the program as described under point 1.5.1 to change the
adjustments of the points 1.5.2. After you have stored the settings you can return to the standard
program mode again by switching off and the switching on the centrifuge.
7 4 1