Labnet Z206A High Capacity, Compact Research Centrifuge - Manual (Page 4)

Page 4 of 24 INSTRUCTION MANUAL Z 206 A © HERMLE Labortechnik GmbH
1 PRODUCT DESCRIPTION
The manufacturer is responsible for safety and reliability of the centrifuge when:
• The unit is operated in accordance with this instruction manual.
• Modifications, repairs or other adjustments are performed by HERMLE-authorized personnel and the
electrical installation of the related location corresponds to the IEC-regulations.
1.1.1.2 Brief description
Model Z 206 A is a compact small centrifuge capable of running swing out and angle rotors. All relevant
run parameters can easily be set with the display keys and be pre-selected with the main adjustment
knob. All pre-selected and actual values are permanently displayed on large LCD display.
The lid is latched and released with an electronic lid lock.
The centrifuge has a powerful, maintenance-free motor with a low noise level.
1.1.1.3 Safety standards
The centrifuge corresponds with the General Requirements for Medical Units Regulations (MedGV)
(group 3).
Following standards have been considered for the production of our centrifuges:
• Accident Prevention Regulation for electrical units and installations UVV VBG 4
• Accident Prevention Regulation for centrifuges as per BGR 500; Chapter 2.11; Part 3
• DIN 58970 part 1, 2 and 4 for centrifuges and tubes
• Electrical Interference Suppression according to interference degree B as per VDE 0871
• Electrical Safety as per IEC 1010-1 and IEC 1010-2-D
• European Standard PR EN 61 010-1 and PR EN 61 010-2-2