Leica Biosystems LPC Operating Manual - Manual (Page 14)

14 Operating Manual V 1.0 – 06/2010
4.1 Unpacking instructions
When the instrument arrives, check the tilt indicator (1) on the package. If the arrowhead is
blue, the shipment was transported laying flat, was tilted at too great an angle or fell over dur-
ing transport.
Note this on the shipping documents and check the shipment for possible damage. If it is evi-
dent that the shipment was damaged during transport, please make a claim to the carrier im-
mediately.

• Pry out the top eight clamps (2) -
as shown in the cutout (Fig. 4a).
• Remove the cover (3).
• To remove the side panel (4), re-
move the bottom two clamps
(5, Fig. 5, see cutout Fig. 4a).
• Carefully remove the printer (6),
the filter (7) and the accessory
cartons (8). Place the printer on a
stable laboratory bench.
Depending on the accessories or-
dered, the shipment may include an
empty carton used as dunnage to
guarantee safe transport.
1
2
2
3
5
4
Fig. 4
Fig. 4a
For safe transport of the instrument, we recommend keeping the original packaging and clamps.
6
7
8
8
8
Fig. 6 Fig. 5
4. Instrument Setup