Barco Coronis Fusion MDCC 6130 - Manual (Page 38)

Display parts, controls and connectors
38
Figure 4: Connectors front
1. “Left” DVI (digital) video input. See note below.
2. 24 VDC power input.
3. USB upstream connector (to PC).
4. USB downstream connector.
If the display’s USB upstream connector is connected to the PC
USB bus, you can use the USB downstream connector to connect
peripheral USB devices.
USB 2.0 devices are supported.
5. +5 Vdc, 0.25 A power output for accessories.
6. +3.3 Vdc, 0.25 A auxiliary power output.
7. “Right” DVI (digital) video input. See note below.
8. Slots for security cable (e.g., Kensington lock).
9. USB downstream connectors
If the display’s USB upstream connector at the rear is connected
to the PC USB bus, you can use these USB downstream
connectors to connect peripheral USB devices.
9