Barco Coronis Fusion MDCC 6130 - Manual (Page 54)

Driver and Software Installation
54
Barco MXRT Driver Removal Wizard (driver version may be different
than what is pictured)
Note: After uninstalling the driver, shutdown the machine and
remove the card. If you leave the card in the system, Windows 7
will automatically attempt to reinstall the driver.
Silent Installation of Drivers and Software
Once A Barco graphics driver has been pre-loaded into the driver store
of a Windows 7 OS, subsequent installation of the driver would be
intervention-free.
To pre-load the driver software into the driver store, open a command
shell and navigate to the appropriate driver directory and run the
PnPUtil program with the -a "add" parameter. For example:
cd d:\Barco\drivers\VS32\MXRT
pnputil -a *.inf
The PnPUtil will parse the inf files and add the MXRT drivers to the
driver store.
If this is the first installation of a Barco driver, the trust prompt will ask
whether you really want to install the driver. Check the box that says