Barco Coronis Fusion MDCC 6130 - Manual (Page 41)

Connecting the signal cables
41
Figure 6: Signal cable connections
• Connect Head1 of the graphic board to the “left” DVI
connector (4) and connect Head2 to the “right” DVI connector
(8).
(“Left” and “Right” refer to their location for the user looking
at the screen.)
• Connect a PC USB downstream connector to the display’s USB
upstream connector (6) by means of a USB cable.
• Connect any USB device to one of the display’s USB
downstream connectors (7).
• Connect the supplied external DC power supply to the DC
power input (5) of the display. Connect the other end of the
external DC power supply (9) to a grounded power outlet by
means of the proper power cord delivered in the packaging.
Figure 7: External DC power supply
R
L
5
6
7
4
8
9
5