Lenze PC-based automation - Manual (Page 15)

DMS 1.3 EN - 02/2011
L
15
Control technology| System manual
System description
System components
Embedded Line
Embedded Line Industrial PCs are designed for installation into control cabinets, casing of
machinery, or other mounting cutouts and are provided with bolts and clamping screws on
the rear face to ensure simplicity of assembly and assured sealing (IP65) even in aggressive
industrial environments.
Features of the supported device series EL 1800 ... EL 9800
 Display
– Display size 8-19.0 inches
– Different front/keyboard variants
 Interfaces:
– Ethernet on-board
– Option: 2 x CAN (example: one Logic bus line and one Motion bus line)
– Option: 4 x CAN (example: one Logic bus line and three Motion bus lines)
– Option: EtherCAT
– Option: PROFIBUS