Lenze PC-based automation - Manual (Page 5)

DMS 1.3 EN - 02/2011
L
5
Control technology| System manual
About this documentation
1 About this documentation
This system manual contains information about the system structure of the control tech-
nology. As a superior document, the system manual gives an overview of the system com-
ponents of the control technology and their interconnection.
System commissioning is described as work flow. Detailed information about the individu-
al components, target systems, and the software to be used can be found in the manuals
for the related devices and components.
Depending on the software equipment purchased, some chapters of this manual may be
irrelevant.
The present manx800ual is part of the "PC-based automation" manual collection. It con-
sists of the following components:
Documentation Subject
System Manual
"PC-based automation"
• Control technology - system structure & configuration
(Software) manual
"PC-based automation"
• Industrial PC - parameter setting & configuration
Operating Instructions
"Embedded Line Panel PC"
• EL x800 - panel PC with TFT display
Operating Instructions
"Command Station"
• CS x800 - stand-alone operator terminal
Operating Instructions
"Control Cabinet PC"
• CPC 2800 - control cabinet PC
Operating Instructions
"HMI EL 100"
• EL 1xx - HMI with Windows
®
CE
Communication manuals
"PC-based automation"
• CANopen control technology - commissioning & configuration
• EtherCat control technology - commissioning & configuration
• PROFIBUS control technology - Commissioning & configuration
Software manuals
"PC-based automation"
• »IPC Backup & Restore«
• IPC as gateway - parameter setting & configuration
Further software manuals • »Global Drive Control« (»GDC«)
–IPC as gateway - parameter setting & configuration
• »Engineer«
• »PLC Designer« / »PLC Designer - SoftMotion« / »PLC Designer - CANopen
für Laufzeitsysteme«
• »VisiWinNET® Smart«

Information on how to use the IPCs outside the control technology can be found in
the system manuals created for the prevailing application case.