Lenze Cam Designer Basic - Manual (Page 32)

Cam Designer Basic
Operation
Create a new project
32 2.1 EN - 09/2005
L
6.1.6 Creating further products

How to create further projects in »Cam Designer Basic«:
1. Select the command FileOpen to open a project already created from the direc-
tory which already contains project data (*.cam).
2. Select an available product to be loaded and press the Open button.
• The selected product, in this example product2, is loaded by the »Cam Designer
Basic«.
3. Select the command EditProject settings to open the dialog box Settings.

Note!
The path of the LCx-file must not be changed.