Lenze Cam Designer Basic - Manual (Page 41)

L
2.1 EN - 09/2005 41
Cam Designer Basic
Functions
Settings of the worksheet
7.6 Settings of the worksheet

How to configure the worksheet:
1. Select the menu command EditProject settings in the »Cam Designer Basic«.
• The Settings opens.
2. Go to the Settings dialog box, change to the Master or Slave tab for the master and
slave axis and define the units for the axes.
3. Close the Settings dialog box with OK.
7.7 Creation of profiles
A simple profile is created and transferred to the controller.
For a better representation and obtaining a zero axis, go to the Settings dialog box of the
slave axis and select a negative value (e.g. -20,000) in the Minimum input field and a posi-
tive value (20,000) in the Maximum field.

Tip!
The following figure shows the options of creating a profile in the »Cam Designer
Basic«.

How to create a profile:
1. Select the command ViewObject Input Mode to take the worksheet to the input
mode.
2. Create the graphical elements required by using the command in the Draw menu.
3. Create a profile using all tools available. Ensure that the profile objects do not over-
lap each other and the profile is closed.
4. Go to the interpolation mode selecting View Interpolation mode.
5. Compile the profile selecting FileCreate and download LCx-file.
6. The profiles, cams etc. are transmitted to the LCx-files.