MAMAC Systems IP-SM-101 - Manual (Page 16)

SECTION 3 - Main Page
3.1.0
© Copyright 2009 ® Registered trademark MAMAC SYSTEMS, Inc.
15 of 17
DN IS-IPSM101.1
3.1.1
After the initial configuration, any web browser running on a laptop/PC, PDA or a web-enabled
mobile/cell phone can connect to the appliance. The Maverick will serve up the Main page displaying
consumption by the Minute, Day, Week, Month and Year. For each time period, there is a countdown
timer for the time remaining in the current period. The previous period value is also displayed. Alert
Status for each period consumption is also shown. If consumption for any period crosses the
programmed value, the Alert Status will switch from Normal to Alert in red color. The appliance
uses AJAX and XML to update the values on the Main page without refreshing the whole page. As
a result, one second updates for consumption data is possible.
The Maverick also displays the Total Accumulated Pulses value on the Main page. This value is
the number of total pulses since the last reset. All current data (hour, day, week, month, year), except
current minute consumption, is stored in power-backed-up RAM memory and protected for seven (7)
days without power. In the event of a power outage, only the current minute data is lost. If the
previous minute, hour, day, week, month and year data needs to be protected, we recommend using
a small UPS.
SECTION 3 - Data Logging
3.1.2 Data Logging: The Maverick logs data in a CSV (Comma Separated Values) file which can be
imported into NotePad, WordPad, Word or Excel. To view a CSV file of the logged data, navigate to
the Data Logging icon on the navigation bar and highlight CSV. Click the desired time period:
Minute, Hour, Day, Week, Month
or Year. The appliance will serve up the data. To Save or to
Import the CSV file, click File on the browser navigation bar and highlight Save As. Enter a file
name and save the data on the laptop/PC or PDA. Once saved, the file can be imported into any
application which accepts CSV file format or emailed.
To view the logged data as a bar graph, again highlight Data Logging in the navigation bar, select
Graphs, and click the desired time period. The Maverick will initialize a JavaScript and graph the data.