MAMAC Systems IP-SM-101 - Manual (Page 17)

© Copyright 2009 DN IS-IPSM101.1 ® Registered trademark MAMAC SYSTEMS, Inc.
16 of 17
SECTION 3 - Reset Button & XML
3.2.0
3.3.0
Reset Button: If the user misplaces the appliance IP address or forgets the password, the
RESET is designed as a Back Door . If any of the above happens, press and hold the RESET
button for more than 20 seconds until the Heartbeat LED stops pulsing; release the switch. The
Maverick IP Address, Username, and Password configuration will revert back to factory defaults.
XML: The appliance has XML embedded with formatted input and output data. Each data field
has an XML tag defined. To view all XML tags, connect to the Maverick with any browser and then
in the address bar of the browser enter the following: Appliance_IP/sm101.xml . As an
example, if the appliance is set up with the default IP to review XML tag page enter
192.168.1.10/sm101.xml in the browser address bar, and the Maverick will serve up the XML
TAG page as seen in Figure 7. For additional information on XML, please review TI IP XML.