MTS SWIFT 50 GLP Sensor Heavy Trucks User Manual
Page 46
Advertising
SWIFT 50 GLP Sensors
46
Road and Track Vehicles
Installation
E.
Install the slip-ring bracket with the slip ring, conduit bracket, and
restraint tube.
Slide the restraint tube through the hole in the anti-rotate bracket
(installed earlier) as far as necessary to align the slip-ring bracket to the
connectors on the top plate.
The slip-ring bracket fits over the 9-pin connectors on the top plate at
the locations labeled Board A and Board B. The slip-ring bracket is
similarly labeled to prevent connecting it the wrong way.
Advertising