BridgeWave SLE100 - Manual (Page 14)

TM
SLE100 Installation Manual
9 590-00532, rev A
3.3 Installation Tools
The following tools, should be used for installing the radio:
• Screwdriver, slotted 0.1 inch (2.5mm) wide
• Open-end wrench 11/32 (9mm)
• Open-end wrench 9/16 (14mm), 2 ea. (Supplied by BridgeWave)
• Ratchet with 6 inch (15cm) extension and 9/16 inch (14mm) deep socket
• Electrical tape
• Fish tape for pulling cable
• Cable tie wraps
• Hand-held DVM (digital voltmeter) with standard banana plug receptacles
• RJ45 connectors
• RJ45 crimp tool