Retsch AS 200 control - natural frequency - Manual (Page 3)

Retsch GmbH 3
Notes on these operating instructions
These operating instructions for the analytical sieving
machine type AS 200 control give all necessary
information on the sections mentioned in the contents.
They give instructions to the target group(s) defined in
the respective sections for safe, correct handling of the
AS 200 control. It is important that each target group
or groups is (are) familiar with the relevant section, in
order to ensure safe, reliable handling of the machine
according to its intended use.
This technical documentation is for use as a reference
work and as a learning aid. The individual sections are
complete in themselves.
No repair instructions are included in these operating
instructions. If repairs are necessary please contact your
supplier or Retsch GmbH directly.
Retsch GmbH www.retsch.com
Warnings
The following signs are used to warn of hazards:
Personal injuries
Material damage
Repairs
These operating instructions do not contain any repair
instructions. In the interests of your own safety, repairs
should only performed by Retsch GmbH or an authorised
representative (service technician).
In this case, please notify the following:
The local Retsch representative
Your supplier
Retsch GmbH direct
Your address for service: