Retsch AS 200 control - natural frequency - Manual (Page 4)

Retsch GmbH 4
Safety
Target group:
All persons concerned with the machine in any way.
The AS200 is a modern, highly efficient product of Retsch
GmbH, corresponding to state of the art. If the machine
is used according to the intended purpose with a
knowledge of this technical documentation it is
completely safe and reliable to operate.
Safety instructions
As the operating authority it is your duty to ensure that
all persons charged with working on the AS200:
have read and understood all the instructions on safety,
before beginning work know all the instructions and
regulations for the target group relevant to their work,
have access to the technical documentation for this
machine at all times, without problems.
new personnel should be familiarized with safe, proper
handling of the machine before beginning work on the
AS200, either by verbal instruction from a competent
person or through this technical documentation.
improper operation can cause injury to persons or
damage to the equipment. You are responsible for your
own safety and that of your employees.
ensure that no unauthorised persons have access to the
AS200.
For your own protection have your employees confirm
that they have been instructed in operation of the
AS200. The draft of a suitable form is given at the end of
the section on safety.
We exclude claims for damages in any form for damage to persons
or property caused through non-observance of the following safety
instructions.