Robustel R3000 Lite User Guide - Manual (Page 35)

Robustel GoRugged R3000 Lite User Guide
RT_UG_R3000 Lite_v.1.0.0 23.12.2013 34 / 113
Confidential
packet, which is possible to transfer in a given environment.
MRU
Maximum Receiving Unit. It is the identifier of the maximum size of
packet, which is possible to receive in a given environment.
1500
Asyncmap Value
One of the PPP initialization strings. In general, you don’t need to modify
this value.
1
Use Peer DNS Enable to obtain the DNS server’s address from the ISP. Enable
Primary DNS Server
Set the primary DNS server’s address. This item will be unavailable if you
enable “Use Peer DNS”.
Null
Secondary DNS Server
Set the secondary DNS server’s address. This item will be unavailable if
you enable “Use Peer DNS”.
Null
Address/Control
Compression
Used for PPP initialization. In general, you need to enable it as default. Enable
Protocol Field
Compression
Used for PPP initialization. In general, you need to enable it as default. Enable
Expert Options
You can enter some other PPP initialization strings in this field. Each string
can be separated by a space. noccp
nobsdcomp
ISP Profile
This section allow users to preset some ISP profiles which will be shown in the selection list of
“Configuration”->”Cellular WAN”->”Network Provider Type”.
ISP Profile @Cellular WAN
Item Description Default
ISP
Input the ISP’s name which will be shown in the selection list of
“Configuration”->”Cellular WAN”->”Network Provider Type”.
Null
APN, Username,
Password, Dialup No.
All these parameters were provided by the ISP. Null
3.11 Configuration -> Ethernet
This section allows users to set the Ethernet LAN parameters of Eth0.